> > > > Inshore Racing Headsail assembly

High-tech manufacturing for optimal performance

Inshore Racing Headsail assembly

The sail wardrobe of the A 40 RC TP Lessard (shown here), winner of the Trophée Atlantique in IRC1 in 2011, is in Trilam twaron and black technora, an excellent compromise for its race programme.



All our luffs are made in-house at the Carnac loft. We prefer them to the heat-glued ones which are more fragile and difficult to repair.
The photo shows a double cable luff: the first is a tight braid cable to prevent it coming out of the luff groove, and the second is a plastic rod. This double cable luff solution has been chosen to facilitate fast headsail hoists when mark n°3 is approaching at speed....
Fabrication solent course inshore ralingue

Full-length battens

At the luff, the full-length batten is enclosed in a plastic batten box which is screwed in place.

It is placed as close as possible to the luff so that the batten doesn’t drop off to leeward. 

Fabrication solent course inshore latte forcée


A stainless steel ring secured with webbing over 90° ensures that the loads are perfectly spread
The leech line and foot line have an elastic tensioner which prevents them from catching on anything during the numerous manœuvres around the cans. 
Fabrication solent course inshore point d'écoute


The tack is composed of a snap shackle which can be released under load. It is totally recessed into the sail to keep the foot of the sail close to the deck (deck effect).
A textile system (webbing strop or string depending on the type of shackle) facilitates releasing the shackle.
The webbing is secured with hand-stitching using waxed twine.


Fabrication solent course inshore point d'amure


Battens are removable so that they can be removed for transport or if there is a breakage.
The lashing system is the preferred option over Velcro which has a tendency to slip over time.




Read also

Next >>>
See all news >>>